For when you want to prime a piece before painting, use our Junk Monkey Stain Block Primer. Dries clear. Priming ensures better adhesion of our paint to your surface, increases the paint durability of your project, and provides additional protection for your finished piece. Stir well. Primer may be applied with a quality nylon bristle brush, roller or spray. Dry Time: Tack free in 30 to 45 minutes. Recoat in 1 to 2 hours as a primer. 2 to 3 hours when using as a stain blocker. One coat should be sufficient under most conditions. Two coats may be necessary over certain staining agents such as tannic acid and/or mineral salts found in water staining that are difficult to control.
Attention/Caution/Irritant. Low VOC. Water based. Lead Free. Use in a well ventilated area. Clean up with soap and water. FIRST AID in case of eye contact, flush thoroughly with large amounts of water, if irritation persists seek medical attention. Avoid contact with skin. Do not ingest. If swallowed, call poison control center immediately. Not recommended for use while pregnant. Keep out of reach of children. This product contains chemicals known to the state of California to cause cancer and birth defects or reproductive harm.
Paint can fly anywhere! Protect your floors or something around you while you paint! Lay...
Stir your paint well so it works just right! And go right to the bottom...
Here's some premium handmade soap, Junk Monkey™️ fun style of course, to make you look...